How To Install Bi Xenon Hid Conversion Kit

Installation Guide for Bi-Xenon HID Headlights with Power Relay Harness

Parcel Contents

Below are the components included in your Dual Beam Bi-Xenon HID Conversion Kit with a Power Relay Harness. This HID kit volition convert the low beams and high beams to HID, using a unmarried seedling.

NOTE: This installation guide uses our Galaxy Serial 55w Canbus HID kit.

1. Two (2) 10 Xenon HID Bi-Xenon Bulbs
2. Two (2) x Ballast Ignitors (does not utilise to our Moon Series 35W Canbus kits)
3. 2 (2) x Xenon HID Ballasts
4. Two (2) x Ballast Adapters
5. 1 (one) x Ability Relay Harness
6. Mounting Hardware, 3M Double-Sided Record & Zip Ties

Installation Steps

Below are the simple steps to connect your plug and play HID Conversion Kit.

1. Connect the HID Bulbs to the Ignitors.
2. Connect the small connectors from the HID Bulbs to the pocket-sized connectors on the Power relay Harness.
3. Connect the Ignitors to the Ballasts (does not apply to our Moon Serial 35W Canbus kits).
4. Connect the round connector from the Ballasts to the Anchor Adapters.
5. Connect the Anchor Adapters to the male connectors on the Power Relay Harness.
6. Secure the positive and negative wires to your Battery terminals.
7. Connect the female 3-pin connector from the Power Relay Harness to One (one) to your vehicle'due south OEM factory connector.

NOTE: Only one OEM factory connector will be used for this installation. The other manufactory connector will Not be connected to anything.

This is what the finished product will wait like once all connections are done.

NOTES AND WARNINGS

• Never touch on the bulb with your fingers because information technology might blotch it.
• All vehicle with difficult plastic headlight dust covers volition need to drill a 1 inch hole to close and feed the wires through. A safe grommet is included with all our bulbs to seal back the pigsty from moisture and h2o.
• High voltage tin easily give yous an electric discharge or even burn yous.
• When turning the power of the bulb on and off, do not touch information technology.
• Never look straight into the xenon bulb because the light emitted can be very bright and hurt your eyes.
• If an accident occurs, make sure to shut the power supply off.
• Nosotros do not have any responsibility if a customer attempts to get together or disassemble parts that are broken.
• If you ever demand professional help for repairs or a replacement, brand sure to visit your local garage.
• Our products must stay away from any kind of combustible content such as Diluting Agents, Spray Paint, Paper, Oil, etc...
• Never adjust your xenon lights to point upwards because you might diminish the visibility of other drivers on the road.
• To avoid short circuiting your HID bulb, make sure to turn them on only once your vehicle has been started.

Source: https://www.xenonhids.com/installation-guide/bi-xenon-hid-headlights-with-power-relay-harness.html

Posted by: englealighway.blogspot.com

Share this post